3D Printing How To

When layers of your prints don’t adhere properly to the subsequent layers, it results in visible gaps in the design. You can fix this issue using the methods below.

There are several FBX to OBJ converters available. Get to know the ones that are easy to use and how to use them to do the conversion.

Stringing makes the post-processing process tedious and achieving a clean surface is hard. But thankfully there are key things you can do to fix this.

Before you think of replacing your nozzle that is clogged or not extruding correctly, you can try thoroughly cleaning it first to see if there will be improvement.

Avoid 3D print layer shifting by properly fastening the moving components of your 3D printer and using the correct settings in the slicer.

Removing supports is always challenging, especially if they are located in difficult-to-reach or delicate parts of the print. Get to know the tips to consider to avoid them.

Supports often use a lot of materials and sometimes are a nightmare when you want to remove them. Learn how Tree Supports addresses these issues.

For efficient support removal, you should use the correct settings during slicing and also use the proper tools during the removal process. These are discussed in this guide.

3D printers can’t print in mid-air without support structures. Get to know of 5 types of supports to successfully print designs with overhangs that exceed 45 degrees angle.

3D prints not sticking to the bed is common, especially when you use certain materials. Get to know the practical solutions to bed adhesion issues and ensure that you get a perfect print.