The 6.7 × 6.7-inch Mini-ITX motherboard form factor has been around for decades at this point. But while many other types of tech have continued to shrink, most people are still building PCs in bulky towers with full-size ATX motherboards. That really isn’t necessary for most gamers and system builders at this point, even if you're assembling a high-performance rig with a huge, heat-generating RTX 4090.
There was a time when opting for Mini-ITX meant trading performance for a smaller PC, requiring compact components like short, compact graphics cards. While opting for a small-form-factor (SFF) SFX power supply is still often a requirement in the smallest cases, most ITX cases released in recent years also support full-length two- or three-slot graphics cards. Still, that's not always the case, and cards have gotten larger with the launch of Nvidia's 4090. So be sure to check clearances before buying.
Below are our favorite tested picks for the best Mini-ITX cases you can buy today.
The Best Mini-ITX Cases You Can Buy Today
Why you can trust Tom's Hardware Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test.
Lian Li’s Q58 blew us away, making it an easy pick as the best Mini-ITX case for most people. This is a 14.3-liter Mini-ITX case that costs just $130 in its base variant, and it packs great looks, excellent cooling potential, and a flexible internal design.
The basic frame is made from steel, and each side houses half-glass, half-perforated steel panels. The front and the top plate are made from fancier aluminum, altogether giving the case a very premium look and feel. The GPU can draw fresh air straight from the side, but you can still see its pretty RGB through the glass, and you can squeeze a 280mm radiator in the case’s roof.
But, the case can be reconfigured to sacrifice some AIO and storage options in favor of fitting an ATX power supply, which is a great way of achieving some cost savings, in combination with opting for the plain PCIe 3.0 riser cable. Throw another $30 in, and you’ll get a PCIe 4.0 riser cable, ready for RTX 3000 and RX 6000 graphics cards. There are few things not to like about the Q58.
Read: Lian Li Q58 Review
The smallest DIY PC cases from just a few years ago have often been thwarted by the increased cooling needs and size of today's components – particularly graphics cards like Nvidia's RTX 4090. But at 10.4 liters, the Mini-ITX Fractal Design Terra case has (just) enough room for most big GPUs, while delivering eye-catching aesthetics thanks to an aluminum exterior with some real wood trip up front. As compact cases go, this is one of the prettiest around.
I doubt it will have as wide an appeal as its larger North cousin, since component and airflow options are far more limiting here. But if you don't need to pack in the absolute most powerful components (particularly on the CPU side) and you don't need more than a few storage drives, Fractal has once again delivered one of the prettiest cases available – especially if you want a respite from the RGB and aggressive designs that dominate the gaming side of the PC realm. And the Terra's flip-up doors and adjustable spine make this case surprisingly easy to build in for something so compact. Just make sure you bring your modular SFX power supply.
Read: Fractal Design Terra Hands On
When iBuyPower said that it would be opening the Revolt 3’s chassis for purchase as a standalone chassis, we were excited. And now that it’s here, we’re quite impressed. The Hyte Revolt 3 is a compact ITX case that doesn’t cost much at $129, but offers a wonderfully practical design with plenty of mesh, two click-away headphone holders and a carrying handle that sits flush into the top when you don’t need it. Of course, the build quality isn’t quite top-notch at this price. It’s all just painted steel, but the paint finish is nice and with its sleek, tidy looks, will fit in well in almost any gaming setup.
Internally, the Revolt 3 can also house almost any Mini-ITX system you throw at it, with room for large GPUs, up to a 280mm AIO, two 2.5-inch SSDs and one 3.5-inch drive. Better yet, its layout meanst it doesn't need a PCI-e riser cable, so you won’t have to worry about reduced bandwidth on an RTX 3000 or RX 6000 series graphics card.
The only real catch to this chassis is that it relies entirely on the AIO for airflow. But in testing, we found that this setup is perfectly adequate, even when we threw our high-TDP i5-11600K and RTX 3080 Ti graphics card at it.
Read: Hyte Revolt 3 Review
The Evolv Shift 2 stands out at first glance for its towering, small footprint design and beautiful anodized aluminum panels. Priced at $100 for the mesh version and $110 for the variant with TG and an addressable-RGB fan, it easily earns a spot on our Best Mini-ITX PC Cases list.
With a small footprint and beautiful finish in both the tempered-glass and mesh variants, the Evolv Shift 2 is perfect as an SFF PC for use in the living room, or moving around the house wherever you need it. The easily accessible top IO makes plugging devices in a breeze too. Building in it was tight, and came with the typical frustrations associated with Mini-ITX systems, but I still managed a build within about 3 hours, and the end result was well worth the effort. The overall size is a bit bigger than most Mini-ITX cases would be, but the tempered glass side panels do wonders for creating systems to show off, though keep in mind that its single-fan radiator support may be too thermally limiting for some systems.
Read: Evolv Shift 2 Review
Cooler Master’s NR200P Max is an excellent, ready-to-go chassis that comes from the factory with a powerful 850w power supply and 280mm liquid cooler. Top that with the inclusion of both mesh and glass side panels, a PCIe 4.0 riser cable, PSU cables and AIO tubes that are fit to length and pre-routed, and the NR200P Max is extremely simple to build in and an easy recommendation for those looking for simple setup.
All you need to bring is a motherboard, CPU, graphics card, memory, and a boot drive, letting you focus on the important things. The only real catch to this case is that its paint and finish are a bit boring. But with the glass panel showing off your fancy internals, we doubt you’ll mind. And if you do, paint it!
Read: Cooler Master NR200P Max Review
It’s been a common complaint that Mini-ITX cases are expensive. And if there’s one chassis that makes this statement true, it is the Louqe Raw S1. But this is a Mini-ITX case to gawk at. From its elegant design to its thick, one-piece aluminum outer shell, the Louqe Raw S1 is more of a work of art than a case.
However, you can fit a PC in here. There’s no AIO support, nor air filtration. So yes, there are sacrifices, but it offers among the easiest build processes – chances are you’ll be done building within the hour and have a very tidy end result. It will also happily fit huge triple-slot graphics cards, despite its ultra-compact 12-litter frame, and with a fancy ‘Cobalt’ PCIe 4.0 riser cable, there’s hardly a thing about this case that isn’t ultra-premium. It even has a carrying handle.
Just keep in mind the case’s $330 price point and limited availability.
Read: Louqe Raw S1 Review
Other Cases We Tested:
9/25/2022: Montech Sky One Lite
With a sub-$100 price, a mesh front, RGB light bar and a hinged glass side panel, Montech’s Sky One Lite appears to be an impressive deal on paper. But our testing saw it running a little warm and loud. This, combined with its otherwise fairly uninspired design means it doesn’t really stand out in the crowded budget case realm compared to excellent options like Phanteks G360A.
Read: Montech’s Sky One Lite review
9/4/2022: Ssupd Meshroom S
Lian Li spinoff Ssupd (sunny side up design, in case you were wondering) offers up an interesting mesh-covered rectangle with the Meshroom S. It’s compact at 9.7 x 6.6 x 14.2 inches and technically supports up to ATX motherboards and large 13-inch graphics cards. It’s thermal performance was also great in our testing. But it’s expensive for what it is, at $160, there really isn’t any attention paid to cable management, and because of its inverted design (with the motherboard ports facing the bottom), you’ll have to use the included right-angle HDMI cable, or furnish your own right-angle DisplayPort cable. The case also comes with a PCIe 4.0 riser cable, but it only works with sub-ATX-sized motherboards. If you plan on installing an ATX board, you’ll need to supply your own longer riser cable if you’re going to install a GPU (perhaps one of the best graphics cards).
Read: Ssupd Meshroom S review
Quick Mini-ITX Case Shopping Tips
- Triple check your parts compatibility: When building in the best Mini-ITX case, compatibility becomes an issue more often than in bigger cases, so you’ll want to spend extra time planning your build around the case. The best strategy is to start with the case you want, and then find parts that fit accordingly.
- Ensure adequate cooling: Especially in small cases, cooling can become an issue due to limited fan and radiator support. If you’re building a mid-range system, this isn’t much of an issue as most cases can deal with that kind of thermal workload. But if you’re building a high-end PC with a high-TDP CPU and GPU (and especially if you’re going to overclock the CPU or GPU), it may be worth looking for a case that supports 240mm or 280m AIOs (we've tested the best AIO coolers here), plus an extra intake fan.
- Double Check PCIe 4.0 Support: Many of the best Mini-ITX cases use PCI-Express riser cables so that the GPU doesn’t have to be slotted directly into the motherboard. But while PCIe 4.0 cables are on the rise, not every Mini-ITX case comes with one. When installing a modern graphics card and a motherboard that has PCIe 4.0 support, it may be worth the extra outlay, especially if you plan on upgrading your GPU again a few years down the road.
- Follow your heart: When it comes down to it, the best Mini-ITX case for your build depends a lot on what you like. Mini-ITX cases come in all sorts of weird and wonderful designs and shapes, so there are plenty of styles to choose from. Take the time to look at all your options and choose one that best fits your needs and aesthetic taste.
MORE: Best PC Cases
MORE: Best Mini-ITX Cases
